상세 컨텐츠

본문 제목

Fall Arrest System

▣ 기타 시스템 장비

by Blue wings Safety 2020. 10. 12. 14:01

본문

Working safely with magnetic anchors

 

Working safely with magnetic anchors

With McNetiq's magnetic anchors with Controlock® technology a fall arrest system can be safely secured. This technique is especially useful in situations where permanent fixing points cannot be applied.

For a safe use of any magnetic fall arrest system on steel it is critical to assess the magnetic strength of the anchors: the thickness of the steel plate, coatings or paints, and uneven surfaces are influencing the magnetic force. McNetiq’s patented Controlock® system allows the user to check this actual magnetic strength on the spot.

McNetiq supplies magnetic solutions with Controlock® technology since 2013, initially for connecting scaffoldings to steel storage tanks. Users are global contractors that are serving a large range of the most reputable global independent tank storage operators, mayor oil producers, and chemical producers.

 

자기 앵커로 안전하게 작업

Controlock® 기술이 적용된 McNetiq의 마그네틱 앵커로 낙상 방지 시스템을 안전하게 확보할 수 있다. 이 기법은 특히 영구 고정점을 적용할 수 없는 상황에서 유용하다.

강철에 자석 낙하 방지 시스템을 안전하게 사용하려면 앵커의 자기 강도를 평가하는 것이 중요하다. 즉, 강철판의 두께, 코팅 또는 도장, 울퉁불퉁한 표면이 자력에 영향을 미치고 있다. McNetiq의 특허받은 Controlock® 시스템을 통해 사용자는 이 실제 자기 강도를 현장에서 확인할 수 있다.

McNetiq는 비계를 강철 저장 탱크에 연결하기 위해 2013년부터 Controlock® 기술을 적용한 자기 솔루션을 공급한다. 사용자들은 가장 평판이 좋은 세계적인 독립 탱크 저장 운영자, 시장 석유 생산자, 화학 생산자 중 많은 범위에 종사하고 있는 글로벌 계약자들이다.

 

Falling from heights is the most occurring cause of fatal occupational accidents. From the ~2.3 million global work-related fatalities per year, it is estimated that falls from height are 27%.

Legislators demand safety precautions. Mandatory fall protection is required when working at a height of more than 1.2 to 2.5 meters (or 4-8 feet) depending on circumstances.

As two types of active Fall Protection there are:

- Fall Arrest would stop a worker in the process of a fall

- Fall Restraint prevents a worker from reaching an edge

In circumstances where anchor points for fall arrest systems cannot be connected by welding or by using a mechanical connection then McNetiq Fall Arrest magnets with Controlock® technology can be used to form a safe and secure anchor.

In order to prevent the worker from any free fall the magnet will be connected to a lanyard with a harness and stopper.

 

Official standards vary by geographic location and the exact use. Please contact McNetiq to discuss your intended need.

The McNetiq Fall Arrest's compliance with EN795 type B is currently in the process of being certified

 

높이에서 떨어지는 것이 치명적인 직업 사고의 가장 큰 원인이다. 연간 230만 명에 이르는 전 세계 업무 관련 사망자 중에서, 높이에서 떨어지는 사망자 수는 27%로 추산된다.

입법자들은 안전 예방책을 요구한다. 상황에 따라 1.2~2.5m(4~8피트) 이상 높이에서 작업할 경우 의무적으로 낙상 보호가 필요하다.

능동적인 낙상 보호에는 두 가지 유형이 있다.

- 낙상 체포로 추락 과정에서 작업자 제지

- 작업자가 모서리에 닿는 것을 방지하는 낙하 방지 장치

낙상 방지 시스템의 앵커 포인트를 용접 또는 기계적 연결로 연결할 수 없는 상황에서는 Controlock® 기술이 적용된 McNetiq Fall Atture 자석을 사용하여 안전하고 안전한 앵커 형성을 할 수 있다.

작업자가 자유 낙하하는 것을 방지하기 위해 자석은 마대와 마개를 사용하여 비상구에 연결된다.

공식적인 표준은 지리적 위치와 정확한 용도에 따라 다르다. 필요한 사항에 대해 논의하려면 McNetiq에 문의하십시오.

 

관련글 더보기

댓글 영역